DIVUS GmbH is a South Tyrolean manufacturer of KNX touchpanels and building automation systems.
“A KNX touch panel combines the control and visualization of building functions such as lighting, shading, climate and scenes in one interface. Depending on the solution, door communication can also be integrated.”
“DIVUS retrofit solutions are designed to replace older control devices while retaining the existing installation situation where technically suitable. The appropriate solution is assessed for each project.”
“KNX IQ is suitable as a compact stand-alone solution, CTP04 as a room controller and indoor intercom station, and TOUCHZONE or SUPERIO as client touch panels for more extensive visualizations.”
“To configure, connect remotely to the KNX CONTROL device. Open Google Chrome and go to the device's local IP address shown in the project, router or display. If a certificate warning appears, confirm it to go to the interface.”
“First check the KNX bus connection: correct wiring, bus voltage, polarity and possible address conflicts. The standard physical address of the KNX CONTROL device is 0.0.255.”
“For local access, the device can act as a communication interface of type KNXnet/IP be set up in the ETS. To do this, enter the IP address of the KNX CONTROL device manually.”
“All current tools, software packages, firmware files and technical documents are stored centrally in the Download area maintained. Use the filters based on area, product and document type.”
“Manuals, quick starts, data sheets and further technical information can be found in KNX Control download area. This means that the documents remain up-to-date in one place and do not have to be maintained separately on each product or FAQ page.”
Download this profile and inspect its supporting evidence.